Robocopy is a command-line file copy utility from Microsoft. Unlike normal copy commands, Robocopy is designed for reliable copy or mirroring while maintaining the permissions, attributes, owner information, timestamps and properties of the objects copied.
Robocopy Syntax
ROBOCOPY <source> <destination> [file…] [options]
<source> Source Directory (local or network path)
<destination> Destination Directory (local or network path) and
[file…] Specifies the file or files to be copied. You can use wildcard characters (* or ?), if you want. If theFile parameter is not specified, *.* is used as the default value.
| /mon:<N> | Monitors the source, and runs again when more than N changes are detected. |
| /mot:<M> | Monitors source, and runs again in M minutes if changes are detected. |
| /rh:hhmm-hhmm | Specifies run times when new copies may be started. |
| /pf | Checks run times on a per-file (not per-pass) basis. |
| /ipg:n | Specifies the inter-packet gap to free bandwidth on slow lines. |
| /sl | Copies the symbolic link instead of the target. |
| Important |
| When using the /SECFIX copy option, specify the type of security information you want to copy by also using one of these additional copy options:· /COPYALL· /COPY:O
· /COPY:S
· /COPY:U
· /SEC
|
File selection options
| Option | Description |
| /a | Copies only files for which the Archive attribute is set. |
| /m | Copies only files for which the Archive attribute is set, and resets the Archive attribute. |
| /ia:[RASHCNETO] | Includes only files for which any of the specified attributes are set. |
| /xa:[RASHCNETO] | Excludes files for which any of the specified attributes are set. |
| /xf <FileName>[ ...] | Excludes files that match the specified names or paths. Note that FileName can include wildcard characters (* and ?). |
| /xd <Directory>[ ...] | Excludes directories that match the specified names and paths. |
| /xct | Excludes changed files. |
| /xn | Excludes newer files. |
| /xo | Excludes older files. |
| /xx | Excludes extra files and directories. |
| /xl | Excludes “lonely” files and directories. |
| /is | Includes the same files. |
| /it | Includes “tweaked” files. |
| /max:<N> | Specifies the maximum file size (to exclude files bigger than N bytes). |
| /min:<N> | Specifies the minimum file size (to exclude files smaller than N bytes). |
| /maxage:<N> | Specifies the maximum file age (to exclude files older than N days or date). |
| /minage:<N> | Specifies the minimum file age (exclude files newer than N days or date). |
| /maxlad:<N> | Specifies the maximum last access date (excludes files unused since N). |
| /minlad:<N> | Specifies the minimum last access date (excludes files used since N) If N is less than 1900, Nspecifies the number of days. Otherwise, N specifies a date in the format YYYYMMDD. |
| /xj | Excludes junction points, which are normally included by default. |
| /fft | Assumes FAT file times (two-second precision). |
| /dst | Compensates for one-hour DST time differences. |
| /xjd | Excludes junction points for directories. |
| /xjf | Excludes junction points for files. |
Retry options
| Option | Description |
| /r:<N> | Specifies the number of retries on failed copies. The default value of N is 1,000,000 (one million retries). |
| /w:<N> | Specifies the wait time between retries, in seconds. The default value of N is 30 (wait time 30 seconds). |
| /reg | Saves the values specified in the /r and /w options as default settings in the registry. |
| /tbd | Specifies that the system will wait for share names to be defined (retry error 67). |
Logging options
| Option | Description |
| /l | Specifies that files are to be listed only (and not copied, deleted, or time stamped). |
| /x | Reports all extra files, not just those that are selected. |
| /v | Produces verbose output, and shows all skipped files. |
| /ts | Includes source file time stamps in the output. |
| /fp | Includes the full path names of the files in the output. |
| /bytes | Prints sizes, as bytes. |
| /ns | Specifies that file sizes are not to be logged. |
| /nc | Specifies that file classes are not to be logged. |
| /nfl | Specifies that file names are not to be logged. |
| /ndl | Specifies that directory names are not to be logged. |
| /np | Specifies that the progress of the copying operation (the number of files or directories copied so far) will not be displayed. |
| /eta | Shows the estimated time of arrival (ETA) of the copied files. |
| /log:<LogFile> | Writes the status output to the log file (overwrites the existing log file). |
| /log+:<LogFile> | Writes the status output to the log file (appends the output to the existing log file). |
| /unicode | Displays the status output as Unicode text. |
| /unilog:<LogFile> | Writes the status output to the log file as Unicode text (overwrites the existing log file). |
| /unilog+:<LogFile> | Writes the status output to the log file as Unicode text (appends the output to the existing log file). |
| /tee | Writes the status output to the console window, as well as to the log file. |
| /njh | Specifies that there is no job header. |
| /njs | Specifies that there is no job summary. |
Job options
| Option | Description |
| /job:<JobName> | Specifies that parameters are to be derived from the named job file. |
| /save:<JobName> | Specifies that parameters are to be saved to the named job file. |
| /quit | Quits after processing command line (to view parameters)./nosd: |
| /nodd | Indicates that no destination directory is specified. |
| /if | Includes the specified files. |
Examples of Microsoft’s Robocopy syntax.
- To copy contents of C:\UserFolder to C:\FolderBackup:
Robocopy C:\UserFolder C:\FolderBackup
- To copy all contents including empty directories of SourceFolder to DestinationFolder:
Robocopy C:\SourceDir C:\DestDir /E
- Copy files from one computer to another, skipping files already in the destination.
ROBOCOPY \\RX-PC-01\usr\Frames \\Rx-PC-02\Frames *.doc /S
- Move files over 14 days old (note the MOVE option will fail if any files are open and locked).
ROBOCOPY C:\SourceFoldern D:\DestinationFolder /move /minage:14
- /MIR is an option to ROBOCOPY where you mirror a directory tree with all the subfolders including the empty directories and you purge files and folders on the destination server that no longer exists in source.
ROBOCOPY \\sourceserver\share \\destinationserver\share /MIR
Or
ROBOCOPY source-drive:\DIR destination-drive:\DIR /MIR
- The following command will mirror the directories using Robocopy:
Robocopy \\RX-Server-01\Docs \\Rx-Server-02\Docs /MIR /FFT /Z /XA:H /W:5
/MIR specifies that Robocopy should mirror the source directory and the destination directory. Note that this will delete files at the destination if they were deleted at the source.
/FFT uses fat file timing instead of NTFS. This means the granularity is a bit less precise. For across-network share operations this seems to be much more reliable – just don’t rely on the file timings to be completely precise to the second.
/FFT uses fat file timing instead of NTFS. This means the granularity is a bit less precise. For across-network share operations this seems to be much more reliable – just don’t rely on the file timings to be completely precise to the second.
/Z ensures Robocopy can resume the transfer of a large file in mid-file instead of restarting.
/XA:H makes Robocopy ignore hidden files, usually these will be system files that we’re not interested in.
/W:5 reduces the wait time between failures to 5 seconds instead of the 30 second default.
/XA:H makes Robocopy ignore hidden files, usually these will be system files that we’re not interested in.
/W:5 reduces the wait time between failures to 5 seconds instead of the 30 second default.
- Use Robocopy to copy all changes to files in a directory called c:\data to a directory that contains the date, like data_20091124. Create a batch file as follows.
@echo off
set day=%date:~0,2%
set month=%date:~3,2%
set year=%date:~6,4%
Robocopy “c:\data” “c:\backup\data\%day%-%month%-%year%\” /MAXAGE:1
- To mirror the directory “C:\”Folder Name” ” to \\RX-Server-02\Share ” excluding \\server2\Share\prog” from being deleted (since it isn’t present in C:\directory) use the following command:
Robocopy “C:\Files” “\\RX-PC-01\Files” /MIR /XD \\server2\ directory\prog”
Robocopy can be setup as a simply Scheduled Task that runs daily, hourly, weekly etc. Note that Robocopy also contains a switch that will make Robocopy monitor the source for changes and invoke synchronization each time a configurable number of changes has been made. This may work in your scenario, but be aware that Robocopy will not just copy the changes, it will scan the complete directory structure just like a normal mirroring procedure. If there are a lot of files & directories, this may hamper performance.
Robocopy, short for Robust File Copy, is a command-line directory replication and file copy command utility that first made available as feature in Windows Vista and Windows Server 2008, although it has been available as part of Windows Resources Kit. In Windows 7 and Windows Server 2008, Robocopy utility is further enhanced with ability to multi-threaded copy operation feature.
Multi-threaded support allows Robocopy to open multiple threads simultaneously, allowing many files to be copied in parallel. With multi-threaded copying, total time required to complete the operation will be drastically reduced and cut, when comparing with with typical copying one file at time in serial sequential order.
As Robocopy is generally a command-line only utility (although a GUI add-on is available for Robocopy), the new multi-threaded operation capability has to be called via a new switch supported by Robocopy. The new multi-threaded copy feature can be enabled and turned on with the following parameter:
/MT[:n]
Where n will instruct Robocopy to do multi-threaded copies with n threads (default 8). The value of n must be at least 1 and not greater than 128 (between 1 to 128), with 1 as single thread. In fact, Robocopy will copy files and folders in multi-threaded operation by default, with 8 threads in one go. Note that /MT[:n] switch is not compatible with the /IPG and /EFSRAW operations.
For example,
Robocopy C:\Mydocs C:\Yourdocs /MT:32
No comments:
Post a Comment